What absorbs at 597 cm⁻¹ in an FTIR spectrum?
A band near 597 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Schnelle Antwort
A band near 597 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Acetate | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 597, 1030, 1600 | Acetate | 1 |
| Fe3O4 | 597, 2358, 1673 | Metal oxygen, Acetate | 1 |
| composite | 597, 1703, 1295 | Acetate | 1 |
| hematite | 597, 1030, 469 | Metal oxygen | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 597 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“1, 1 cerning temperature originated by the thermo-oxidative 2340 cmand the peak at 597 cmis a representative degradation and informative with the corresponding of C-Cl stretc.hing vibrations (Nirmal Ghosh et al.”
Current plastics pollution threats due to COVID-19 and its possible mitigation techniques: a waste-to-energy conversion via Pyrolysis DOI: 10.1186/s40068-020-00217-x -
Phosphate (PO4) Vertrauen 1,0
“finally, two strong and sharp peaks at 597 and 560 cm-1 are attributed to the triple degenerate antisymmetric bending mode of the [PO 4]3group [9] (Table 5).”
Structural Characterization of Low-Sr-Doped Hydroxyapatite Obtained by Solid-State Synthesis DOI: 10.3390/cryst13010117 -
Sulfate (SO4) Vertrauen 1,0
“cm-1 cm-1 at 666 and 597 represent the stretching and bending vibration of sulfate, the peak at peaks at 666 cm-1 and 597 cm-1 represent the stretching and bending vibration of sulfate, the peak at cm-1 cm-1 1096 is the stretching vibration”
Inhibition of Poly(ethylenediaminetetraacetic acid-diethanolamine) on Deposition of Calcium Sulfate Crystal in Simulated Industrial Water DOI: 10.3390/cryst10060544 -
Vertrauen 1,0
“The characteristic vibra- (S-O stretch) and around 668 and 597 cm-1 (S-O tions of sulfate can be seen at 1100 cm-1 bends) [13].”
Assessment of Easily Accessible Spectroscopic Techniques Coupled with Multivariate Analysis for the Qualitative Characterization and Differentiation of Earth Pigments of Various Provenance DOI: 10.3390/min12060755 -
Metal oxygen Vertrauen 1,0
“4a, FT-IR spectrum of Fe 3O displays a strong absorp4 cm-1 tion band at 597 belonging to the tetrahedral structure of trivalent Fe-O absorption.”
Silver incorporated into g-C3N4/Alginate as an efficient and heterogeneous catalyst for promoting click and A3 and KA2 coupling reaction DOI: 10.1038/s41598-021-93239-z -
Chitosan Vertrauen 1,0
“cm-1 bands at 1,597 and 1,615 In this study, solid-state NMR spectra revealed the in the FTIR spectrum of functional groups of chitosan acetate salt in its molecular chitosan.”
Fernandez Cervera 等 - 2011 - Effects of Spray Drying on Physicochemical Propert DOI: 10.1208/s12249-011-9620-3 -
Vertrauen 0,9
“Explicit assignment in text.”
Plata Lievano 和 Carreno Diaz - 2016 - Synthesis and Characterization of 1-Methyl-3-Metho DOI: 10.1590/1980-5373-MR-2015-0561
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.