What absorbs at 537 cm⁻¹ in an FTIR spectrum?
A band near 537 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Szybka odpowiedź
A band near 537 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Możliwe przypisania grup funkcyjnych
| Grupa funkcyjna | Fakty wspierające | Cytowane źródła | Najwyższa wiarygodność |
|---|---|---|---|
| Metal oxygen | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Sulfonate | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
Ranking odzwierciedla zgromadzone dowody literaturowe, a nie pojedynczą autorytatywną zasadę. Zawsze potwierdzaj w kontekście swojej próbki.
Możliwe materiały
| Materiał | Piki potwierdzające | Nakładające się grupy | Cytowane źródła |
|---|---|---|---|
| PMMA | 537, 1722, 1383 | Alkyl C-H | 1 |
| pectin | 537, 1746, 1150 | Alkyl C-H | 1 |
| copper oxide | 537, 624, 1686 | Metal oxygen, Alkyl C-H | 1 |
| rGO | 537, 2358, 2930 | Alkyl C-H | 1 |
| lignin | 537, 1035, 1510 | Alkyl C-H | 1 |
| wood | 537, 1740, 1730 | Alkyl C-H | 1 |
Materiały są wyświetlane tylko wtedy, gdy ta sama baza literaturowa potwierdza to pasmo i co najmniej jeden dodatkowy charakterystyczny pik.
Logika widma
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 537 cm⁻¹ is usually not enough for material identification by itself.
Zastosowanie w rzeczywistości
Ten typ zapytania jest powszechny w identyfikacji polimerów, przesiewaniu nieznanych tworzyw sztucznych, rozwiązywaniu problemów z kontrolą jakości, weryfikacji materiałów pochodzących z recyklingu oraz przeglądzie przypisania pików wspartym literaturą.
Częste błędy
- Traktowanie jednego izolowanego pasma jako dowodu materiału bez sprawdzenia co najmniej jednego lub dwóch pików wspierających.
- Ignorowanie nakładania się: wiele grup funkcyjnych może przyczyniać się w pobliżu tej samej liczby falowej.
- Pomijanie walidacji, gdy dodatki, mieszanki, utlenianie lub zanieczyszczenia mogą zniekształcić widmo.
Porada dotycząca weryfikacji
Gdy pozostaje niejednoznaczność, zweryfikuj hipotezę za pomocą DSC, GC-MS lub TGA, szczególnie w przypadku mieszanin, zdegradowanych próbek i wypełnionych polimerów.
Literatura stojąca za tymi przypisaniami
-
Carbonyl (C=O) wiarygodność 1,0
“In the O 1s scan of PAA the peak at 537 eV was attributed to the presence of carbonyl and hydroxyl groups of the carboxylic group as shown in Fig.”
Fareed 和 Stamboulis - 2014 - Nanoclays reinforced glass ionomer cements disper DOI: 10.1007/s10856-013-5058-3 -
wiarygodność 1,0
“cm-1 peak at 537 develops due to the Cu-O stretching which corresponds to the B mode [35].”
Rapid analyses of stress of copper oxide nanoparticles on wheat plants at an early stage by laser induced fluorescence and attenuated total reflectance Fourier transform infrared spectroscopy DOI: 10.1016/j.vibspec.2017.06.004 -
wiarygodność 1,0
“cm-1 at 422 and 410 The increase in the intensity of the absorption band at 537 could be attributed to an incorporation of zinc ions in the tetrahedral site depending on the preference of these ions for this site.”
Effects of Zinc Substitution on the Microstructural and Magnetic Characteristics of Cubic Symmetry Nickel Ferrite System DOI: 10.3390/sym15050975 -
wiarygodność 1,0
“The peak at 910 corresponded to the bending vibrations of the cm-1 The peaks at 537 and 467 corresponded to the deformation vibrations of the Al-O-Si”
Enhancing the Thermal Stability of Ionogels: Synthesis and Properties of Triple Ionic Liquid/Halloysite/MCC Ionogels DOI: 10.3390/molecules26206198 -
Sulfonate wiarygodność 1,0
“The peaks for SO3 bending and rocking were obtained at 537 cm-1 and 413 cm-1, 3 cm-1, 413 respectively [16].”
Anis 等 - 2023 - Studies on Polybenzimidazole and Methanesulfonate DOI: 10.3390/polym15132821 -
wiarygodność 1,0
“- the appearance of new bands from 1115 (of high intensity) and 537 cm-1 were assigned to silica and other oxides from FA, as seen in Figure 3.”
The Influence of Fly Ash on the Mechanical Properties of Water Immersed All Waste Composites DOI: 10.3390/polym14101957 -
Amide wiarygodność 1,0
“cm(cid:5)1 cm(cid:5)1 and 607.7 stretching, and absorption bands between 1479.1 TheFTIRspectrumwasusedtoidentifythefunctionalgroupofactive cm(cid:5)1 are characteristic of the amide II region and bands from 536.9 to componentsbasedonthepeak”
Phytochemical screening, polyphenols, flavonoids and tannin content, antioxidant activities and FTIR characterization of Marrubium vulgare L. from 2 different localities of Northeast of Morocco DOI: 10.1016/j.heliyon.2020.e05609 -
wiarygodność 1,0
“The rGO (rGO) impregnated with magnetic Fe 3O showed an 4 cm-1", additional peak at "537 which gives a clear identification of the Fe-O-Fe bond [37].”
Fabrication of MNPs/rGO/PMMA Composite for the Removal of Hazardous Cr(VI) from Tannery Wastewater through Batch and Continuous Mode Adsorption DOI: 10.3390/ma14226923
Masz widmo z tym pasmem?
Prześlij swoje widmo FTIR i uzyskaj pełny raport interpretacji — przypisania pików z cytowaniami literaturowymi, dopasowania biblioteczne oraz łańcuch dowodów z oceną wiarygodności — w kilka sekund.