What absorbs at 3770 cm⁻¹ in an FTIR spectrum?
A band near 3770 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Quick answer
A band near 3770 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Metal hydroxyl | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Adsorbed carbon monoxide | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Possible materials
| Material | Unterstützende Peaks | Overlapping groups | Zitierte Quellen |
|---|---|---|---|
| Methane | 3770, 1740, 1400 | Carboxyl (COOH), Hydroxyl (O-H) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3770 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatur hinter diesen Zuweisungen
-
Metal hydroxyl Vertrauen 1,0
“The CO stretching band at 2200-2180 are assigned to type I Al-OH basic hydroxyl groups cm(cid:1)1: AlIV-OH (band at 3770 type Ia basic hydroxyl group, corresponds to CO adsorbed on medium and weak Lewis acid cm(cid:1)1: AlVI-OH”
Benkhaled 等 - 2006 - Synthesis of highly dispersed palladium alumina su DOI: 10.1016/j.apcata.2006.06.011 -
Metal hydroxyl Vertrauen 1,0
“cm-1 could be assigned to the terminal -OH groups (Si-OH, Al-OH) The band at 3770 cm-1 located on the external surface or in large cages while that located at 3570 is characteristic cages21,38.”
LA‐H‐Zeolites Efficient Catalysts For Acetic Acid Ketonic Decarboxylation and Esterification DOI: 10.1002/jctb.6732 -
Hydroxyl (O-H) Vertrauen 0,7
“Text mentions bands between 3600 and 3770 cm-1 and changes in isolated OH groups.”
Christensen 等 - 2018 - The Production of Methane, Acetone, Cold CO and DOI: 10.1021/acs.jpca.7b12297
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.