FTIR ਪੀਕ ਵਿਆਖਿਆ

What absorbs at 774 cm⁻¹ in an FTIR spectrum?

A band near 774 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.

Backed by 8 cited sources

ਤੁਰੰਤ ਜਵਾਬ

A band near 774 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.

ਸੰਭਾਵਿਤ ਫੰਕਸ਼ਨਲ-ਗਰੁੱਪ ਅਸਾਈਨਮੈਂਟਾਂ

ਫੰਕਸ਼ਨਲ ਗਰੁੱਪ ਸਹਾਇਕ ਤੱਥ ਹਵਾਲਾ ਦਿੱਤੇ ਸਰੋਤ ਉੱਚ ਵਿਸ਼ਵਾਸ
Silicon-oxygen (Si-O) 2 2 1.0
Hydroxyl (O-H) 1 1 1.0
C c single bond 1 1 1.0
N h 1 1 1.0
Amide 1 1 1.0
Water (H2O) 1 1 1.0
Alkyl C-H 1 1 1.0
Aromatic ring 1 1 1.0
Siloxane (Si-O-Si) 1 1 0.9

ਰੈਂਕਿੰਗ ਸੰਚਿਤ ਸਾਹਿਤ ਸਬੂਤਾਂ ਨੂੰ ਦਰਸਾਉਂਦੀ ਹੈ, ਇੱਕ ਸਿੰਗਲ ਅਧਿਕਾਰਤ ਨਿਯਮ ਨਹੀਂ। ਹਮੇਸ਼ਾਂ ਆਪਣੇ ਨਮੂਨੇ ਦੇ ਸੰਦਰਭ ਦੇ ਵਿਰੁੱਧ ਪੁਸ਼ਟੀ ਕਰੋ।

ਸੰਭਵ ਸਮੱਗਰੀਆਂ

ਸਮੱਗਰੀ ਸਹਾਇਕ ਚੋਟੀਆਂ ਓਵਰਲੈਪਿੰਗ ਸਮੂਹ ਹਵਾਲਾ ਦਿੱਤੇ ਸਰੋਤ
PVA 774, 1660, 2930 Hydroxyl (O-H) 1
ZnO 774, 1400, 3430 Hydroxyl (O-H) 1
CuO 774, 453, 1000 Hydroxyl (O-H) 1
glucose 774, 1740, 1400 Hydroxyl (O-H) 1
magnetite 774, 1740, 1263 Hydroxyl (O-H), Silicon-oxygen (Si-O) 1
quartz 774, 800, 3053 Silicon-oxygen (Si-O), Hydroxyl (O-H) 1

ਸਮੱਗਰੀ ਸਿਰਫ਼ ਉਦੋਂ ਦਿਖਾਈ ਜਾਂਦੀ ਹੈ ਜਦੋਂ ਇੱਕੋ ਸਾਹਿਤ ਪੂਲ ਇਸ ਬੈਂਡ ਅਤੇ ਘੱਟੋ-ਘੱਟ ਇੱਕ ਵਾਧੂ ਵਿਸ਼ੇਸ਼ ਸਿੱਖਰ ਦਾ ਸਮਰਥਨ ਕਰਦਾ ਹੈ।

ਸਪੈਕਟ੍ਰਮ ਤਰਕ

This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 774 cm⁻¹ is usually not enough for material identification by itself.

ਅਸਲ-ਸੰਸਾਰ ਵਰਤੋਂ

This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.

ਆਮ ਗਲਤੀਆਂ

  • ਘੱਟੋ-ਘੱਟ ਇੱਕ ਜਾਂ ਦੋ ਸਹਾਇਕ ਚੋਟੀਆਂ ਦੀ ਜਾਂਚ ਕੀਤੇ ਬਿਨਾਂ ਇੱਕ ਅਲੱਗ-ਥਲੱਗ ਬੈਂਡ ਨੂੰ ਸਮੱਗਰੀ ਦੇ ਸਬੂਤ ਵਜੋਂ ਮੰਨਣਾ।
  • ਓਵਰਲੈਪ ਨੂੰ ਨਜ਼ਰਅੰਦਾਜ਼ ਕਰਦੇ ਹੋਏ: ਕਈ ਕਾਰਜਸ਼ੀਲ ਸਮੂਹ ਇੱਕੋ ਵੇਵਨੰਬਰ ਦੇ ਨੇੜੇ ਯੋਗਦਾਨ ਪਾ ਸਕਦੇ ਹਨ।
  • Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.

ਤਸਦੀਕ ਸਲਾਹ

ਜਦੋਂ ਅਸਪਸ਼ਟਤਾ ਬਣੀ ਰਹਿੰਦੀ ਹੈ, ਤਾਂ DSC, GC-MS, ਜਾਂ TGA ਨਾਲ ਪਰਿਕਲਪਨਾ ਦੀ ਪੁਸ਼ਟੀ ਕਰੋ, ਖਾਸ ਕਰਕੇ ਮਿਸ਼ਰਣਾਂ, ਵਿਗੜੇ ਹੋਏ ਨਮੂਨਿਆਂ ਅਤੇ ਭਰੇ ਹੋਏ ਪੌਲੀਮਰਾਂ ਲਈ।

ਇਹਨਾਂ ਅਸਾਈਨਮੈਂਟਾਂ ਪਿੱਛੇ ਸਾਹਿਤ

ਕੀ ਇਸ ਬੈਂਡ ਨਾਲ ਇੱਕ ਸਪੈਕਟ੍ਰਮ ਹੈ?

ਆਪਣਾ FTIR ਸਪੈਕਟ੍ਰਮ ਅੱਪਲੋਡ ਕਰੋ ਅਤੇ ਸਕਿੰਟਾਂ ਵਿੱਚ ਇੱਕ ਪੂਰੀ ਵਿਆਖਿਆ ਰਿਪੋਰਟ ਪ੍ਰਾਪਤ ਕਰੋ — ਪੀਕ ਅਸਾਈਨਮੈਂਟਾਂ, ਲਾਇਬ੍ਰੇਰੀ ਮੈਚ, ਅਤੇ ਇੱਕ ਵਿਸ਼ਵਾਸ-ਦਰਜਾ ਪ੍ਰਾਪਤ ਸਬੂਤ ਲੜੀ।

ਬੇਨਤੀ ਜਮ੍ਹਾਂ ਕਰੋ ਫਾਰਮ