What absorbs at 682 cm⁻¹ in an FTIR spectrum?
A band near 682 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Câu trả lời nhanh
A band near 682 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Chlorine | 3 | 3 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Styrene | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| N n bond | 1 | 1 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| iron oxide | 682, 1130, 891 | Metal oxygen | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 682 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
N n bond độ tin cậy 1,0
“(n n cm-1 845 and 971 and are due to stretching vibrations of SiO and 3) and bands at 486 and N 4 1 A (n n cm-1 682 are due to bending vibrations of O-Si-O and 4) [30, 31].”
Driving the photoluminescent and structural properties of X2-Y2SiO5 by varying the dopant Dy3+ concentration towards cool wLED applications DOI: 10.1016/j.solidstatesciences.2017.05.008 -
Silicon (Si) độ tin cậy 1,0
“and the bands at 786.03 cm-1, 682.05 cm-1, and 509.46 cm-1 represent Si-O Quartz, Si-O-Si bending, and Fe-O Fe2O3 Si-O-Al stretching, respectively.”
Foliar Application of Nanoclay Promotes Potato (Solanum tuberosum L.) Growth and Induces Systemic Resistance against Potato Virus Y DOI: 10.3390/v14102151 -
độ tin cậy 1,0
“cm-1 cm-1 cm-1 occur at 1593.5 (NH scissoring vibration), 1503.1 (aromatic ring stretching), 1334.2 2 (SO2 asymmetric stretching), 1144.6 cm-1 (SO2 symmetric stretching) and 681.8 cm-1 (C-Cl stretching).”
Garbacz 和 Wesolowski - 2018 - DSC, FTIR and Raman Spectroscopy Coupled with Mult DOI: 10.3390/molecules23092136 -
Styrene độ tin cậy 1,0
“cm-1, + For St 10% L-M (Figure 3c) the signal intensity was lower, apart from the absorption band at 682 which was related to the decomposition of the unreacted styrene [16].”
Preparation, Thermal, and Mechanical Characterization of UV-Cured Polymer Biocomposites with Lignin DOI: 10.3390/polym12051159 -
độ tin cậy 1,0
“22%, which confirms strong binding between the oleic acid molecules and Fe 4 The third peak is at 682 °C, and the percentage of mass loss is about 2.5% which is attributed to the phase transition from Fe 3O to FeO, because FeO is thermodyna”
Synthesis, Surface Modification and Characterisation of Biocompatible Magnetic Iron Oxide Nanoparticles for Biomedical Applications DOI: 10.3390/molecules18077533 -
Ring structure độ tin cậy 1,0
“The peak at 177 cm-1 is with the highest intensity are 101, 177, 1144, 1456, and 2923 attributed to Zn-N bond vibrations, the peak at 682 cm-1 is attributed to imidazolate ring puckering vibrations, the peak at 1144 cm-1 is attributed to Zn”
Biocatalysts Synthesized with Lipase from Pseudomonas cepacia on Glycol-Modified ZIF-8: Characterization and Utilization in the Synthesis of Green Biodiesel DOI: 10.3390/molecules27175396 -
Metal oxygen độ tin cậy 1,0
“cm-1.36 αCD Figure S1, the peaks observed at m/z 681.56, 1135.96, and appeared at 1129 When, the UMB + inclusion αCD -O-H 1157.99 are related to the molecular ions, [UMB + + complex is formed, bond-stretching frequency of the cm-1, αCD resp”
Roy 等 - 2020 - Exploring the Inclusion Complex of a Drug (Umbelli DOI: 10.1021/acsomega.0c04716 -
độ tin cậy 1,0
“2 cm-1 cm-1 obtained for the data acquired from DSC or FTIR 681.8 (C-Cl stretching), 577.6 (O-H bending (Table 2).”
Principal component and cluster analyses as supporting tools for co-crystals detection DOI: 10.1007/s10973-017-6436-8
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.