What absorbs at 682 cm⁻¹ in an FTIR spectrum?
A band near 682 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Gyors válasz
A band near 682 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Lehetséges funkcionális csoport hozzárendelések
| Funkcionális csoport | Támogató tények | Hivatkozott források | Legmagasabb megbízhatóság |
|---|---|---|---|
| Chlorine | 3 | 3 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Styrene | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| N n bond | 1 | 1 | 1,0 |
A rangsor a felhalmozott irodalmi bizonyítékokat tükrözi, nem egyetlen tekintélyes szabályt. Mindig ellenőrizze a minta kontextusában.
Lehetséges anyagok
| Anyag | Támogató csúcsok | Átfedő csoportok | Hivatkozott források |
|---|---|---|---|
| iron oxide | 682, 1130, 891 | Metal oxygen | 1 |
Az anyagok csak akkor jelennek meg, ha ugyanaz az irodalmi adatbázis támogatja ezt a sávot és legalább egy további jellegzetes csúcsot.
Spektrum logika
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 682 cm⁻¹ is usually not enough for material identification by itself.
Valós használat
Ez a típusú lekérdezés gyakori a polimerazonosításban, ismeretlen műanyag szűrésében, minőségellenőrzési hibaelhárításban, újrahasznosított anyag ellenőrzésében és irodalommal alátámasztott csúcshozzárendelés-áttekintésben.
Gyakori hibák
- Egy elszigetelt sáv kezelése anyag bizonyítékaként anélkül, hogy legalább egy vagy két támogató csúcsot ellenőriznénk.
- Az átfedés figyelmen kívül hagyása: több funkciós csoport is hozzájárulhat ugyanazon hullámszám közelében.
- Az érvényesítés kihagyása, amikor adalékanyagok, keverékek, oxidáció vagy szennyeződés torzíthatja a spektrumot.
Ellenőrzési tanács
Ha kétértelműség marad, érvényesítse a hipotézist DSC, GC-MS vagy TGA segítségével, különösen keverékek, lebomlott minták és töltött polimerek esetében.
A hozzárendelések mögötti irodalom
-
N n bond megbízhatóság 1,0
“(n n cm-1 845 and 971 and are due to stretching vibrations of SiO and 3) and bands at 486 and N 4 1 A (n n cm-1 682 are due to bending vibrations of O-Si-O and 4) [30, 31].”
Driving the photoluminescent and structural properties of X2-Y2SiO5 by varying the dopant Dy3+ concentration towards cool wLED applications DOI: 10.1016/j.solidstatesciences.2017.05.008 -
Silicon (Si) megbízhatóság 1,0
“and the bands at 786.03 cm-1, 682.05 cm-1, and 509.46 cm-1 represent Si-O Quartz, Si-O-Si bending, and Fe-O Fe2O3 Si-O-Al stretching, respectively.”
Foliar Application of Nanoclay Promotes Potato (Solanum tuberosum L.) Growth and Induces Systemic Resistance against Potato Virus Y DOI: 10.3390/v14102151 -
megbízhatóság 1,0
“cm-1 cm-1 cm-1 occur at 1593.5 (NH scissoring vibration), 1503.1 (aromatic ring stretching), 1334.2 2 (SO2 asymmetric stretching), 1144.6 cm-1 (SO2 symmetric stretching) and 681.8 cm-1 (C-Cl stretching).”
Garbacz 和 Wesolowski - 2018 - DSC, FTIR and Raman Spectroscopy Coupled with Mult DOI: 10.3390/molecules23092136 -
Styrene megbízhatóság 1,0
“cm-1, + For St 10% L-M (Figure 3c) the signal intensity was lower, apart from the absorption band at 682 which was related to the decomposition of the unreacted styrene [16].”
Preparation, Thermal, and Mechanical Characterization of UV-Cured Polymer Biocomposites with Lignin DOI: 10.3390/polym12051159 -
megbízhatóság 1,0
“22%, which confirms strong binding between the oleic acid molecules and Fe 4 The third peak is at 682 °C, and the percentage of mass loss is about 2.5% which is attributed to the phase transition from Fe 3O to FeO, because FeO is thermodyna”
Synthesis, Surface Modification and Characterisation of Biocompatible Magnetic Iron Oxide Nanoparticles for Biomedical Applications DOI: 10.3390/molecules18077533 -
Ring structure megbízhatóság 1,0
“The peak at 177 cm-1 is with the highest intensity are 101, 177, 1144, 1456, and 2923 attributed to Zn-N bond vibrations, the peak at 682 cm-1 is attributed to imidazolate ring puckering vibrations, the peak at 1144 cm-1 is attributed to Zn”
Biocatalysts Synthesized with Lipase from Pseudomonas cepacia on Glycol-Modified ZIF-8: Characterization and Utilization in the Synthesis of Green Biodiesel DOI: 10.3390/molecules27175396 -
Metal oxygen megbízhatóság 1,0
“cm-1.36 αCD Figure S1, the peaks observed at m/z 681.56, 1135.96, and appeared at 1129 When, the UMB + inclusion αCD -O-H 1157.99 are related to the molecular ions, [UMB + + complex is formed, bond-stretching frequency of the cm-1, αCD resp”
Roy 等 - 2020 - Exploring the Inclusion Complex of a Drug (Umbelli DOI: 10.1021/acsomega.0c04716 -
megbízhatóság 1,0
“2 cm-1 cm-1 obtained for the data acquired from DSC or FTIR 681.8 (C-Cl stretching), 577.6 (O-H bending (Table 2).”
Principal component and cluster analyses as supporting tools for co-crystals detection DOI: 10.1007/s10973-017-6436-8
Van spektruma ezzel a sávval?
Töltsön fel egy FTIR spektrumot, és kapjon egy teljes értelmezési jelentést — csúcs-hozzárendeléseket irodalmi hivatkozásokkal, könyvtári egyezéseket és egy megbízhatósági szinttel ellátott bizonyítékláncot — másodpercek alatt.