What absorbs at 682 cm⁻¹ in an FTIR spectrum?
Ивица близо до 682 cm⁻¹ може да сочи към няколко функционални групи. По-долу са най-вероятните присвоявания, подредени по количеството публикувани доказателства, които ги подкрепят — всяко едно проследимо до литература (DOI) и кръстосано валидирано спрямо нашите 130 000+ референтни спектъра и графика на знанията.
Backed by 8 cited sources
Бърз отговор
A band near 682 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Възможни определяния на функционални групи
| Функционална група | Подкрепящи факти | Цитирани източници | Най-висока достоверност |
|---|---|---|---|
| Chlorine | 3 | 3 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Styrene | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| N n bond | 1 | 1 | 1,0 |
Класирането отразява натрупаните литературни доказателства, а не единично авторитетно правило. Винаги потвърждавайте спрямо контекста на вашата проба.
Възможни материали
| Материал | Подкрепящи пикове | Припокриващи се групи | Цитирани източници |
|---|---|---|---|
| iron oxide | 682, 1130, 891 | Metal oxygen | 1 |
Материалите се показват само когато същата литературна база поддържа тази лента и поне един допълнителен характерен пик.
Логика на спектъра
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 682 cm⁻¹ is usually not enough for material identification by itself.
Използване в реални условия
Този тип заявка е често срещана при идентификация на полимери, скрининг на неизвестни пластмаси, отстраняване на проблеми с качеството, проверка на рециклирани материали и преглед на приписване на пикове, подкрепено с литература.
Често срещани грешки
- Разглеждане на една изолирана лента като доказателство за материал, без да се проверяват поне един или два подкрепящи пика.
- Пренебрегване на припокриване: множество функционални групи могат да допринасят близо до едно и също вълново число.
- Пропускане на валидиране, когато добавки, смеси, окисление или замърсяване могат да изкривят спектъра.
Съвет за проверка
Когато остава неяснота, потвърдете хипотезата с DSC, GC-MS или TGA, особено за смеси, деградирани проби и пълнени полимери.
Литература зад тези определяния
-
N n bond достоверност 1,0
“(n n cm-1 845 and 971 and are due to stretching vibrations of SiO and 3) and bands at 486 and N 4 1 A (n n cm-1 682 are due to bending vibrations of O-Si-O and 4) [30, 31].”
Driving the photoluminescent and structural properties of X2-Y2SiO5 by varying the dopant Dy3+ concentration towards cool wLED applications DOI: 10.1016/j.solidstatesciences.2017.05.008 -
Silicon (Si) достоверност 1,0
“and the bands at 786.03 cm-1, 682.05 cm-1, and 509.46 cm-1 represent Si-O Quartz, Si-O-Si bending, and Fe-O Fe2O3 Si-O-Al stretching, respectively.”
Foliar Application of Nanoclay Promotes Potato (Solanum tuberosum L.) Growth and Induces Systemic Resistance against Potato Virus Y DOI: 10.3390/v14102151 -
достоверност 1,0
“cm-1 cm-1 cm-1 occur at 1593.5 (NH scissoring vibration), 1503.1 (aromatic ring stretching), 1334.2 2 (SO2 asymmetric stretching), 1144.6 cm-1 (SO2 symmetric stretching) and 681.8 cm-1 (C-Cl stretching).”
Garbacz 和 Wesolowski - 2018 - DSC, FTIR and Raman Spectroscopy Coupled with Mult DOI: 10.3390/molecules23092136 -
Styrene достоверност 1,0
“cm-1, + For St 10% L-M (Figure 3c) the signal intensity was lower, apart from the absorption band at 682 which was related to the decomposition of the unreacted styrene [16].”
Preparation, Thermal, and Mechanical Characterization of UV-Cured Polymer Biocomposites with Lignin DOI: 10.3390/polym12051159 -
достоверност 1,0
“22%, which confirms strong binding between the oleic acid molecules and Fe 4 The third peak is at 682 °C, and the percentage of mass loss is about 2.5% which is attributed to the phase transition from Fe 3O to FeO, because FeO is thermodyna”
Synthesis, Surface Modification and Characterisation of Biocompatible Magnetic Iron Oxide Nanoparticles for Biomedical Applications DOI: 10.3390/molecules18077533 -
Ring structure достоверност 1,0
“The peak at 177 cm-1 is with the highest intensity are 101, 177, 1144, 1456, and 2923 attributed to Zn-N bond vibrations, the peak at 682 cm-1 is attributed to imidazolate ring puckering vibrations, the peak at 1144 cm-1 is attributed to Zn”
Biocatalysts Synthesized with Lipase from Pseudomonas cepacia on Glycol-Modified ZIF-8: Characterization and Utilization in the Synthesis of Green Biodiesel DOI: 10.3390/molecules27175396 -
Metal oxygen достоверност 1,0
“cm-1.36 αCD Figure S1, the peaks observed at m/z 681.56, 1135.96, and appeared at 1129 When, the UMB + inclusion αCD -O-H 1157.99 are related to the molecular ions, [UMB + + complex is formed, bond-stretching frequency of the cm-1, αCD resp”
Roy 等 - 2020 - Exploring the Inclusion Complex of a Drug (Umbelli DOI: 10.1021/acsomega.0c04716 -
достоверност 1,0
“2 cm-1 cm-1 obtained for the data acquired from DSC or FTIR 681.8 (C-Cl stretching), 577.6 (O-H bending (Table 2).”
Principal component and cluster analyses as supporting tools for co-crystals detection DOI: 10.1007/s10973-017-6436-8
Имате спектър с тази лента?
Качете вашия FTIR спектър и получете пълен отчет за интерпретация — определяне на пикове с литературни цитати, съвпадения с библиотека и верига от доказателства с оценка на достоверността — за секунди.