What absorbs at 631 cm⁻¹ in an FTIR spectrum?
A band near 631 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Câu trả lời nhanh
A band near 631 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 0,95 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| PVA | 631, 1660, 2930 | Hydroxyl (O-H), Amide | 1 |
| starch | 631, 1650, 1540 | Hydroxyl (O-H), Amide | 1 |
| glycerol | 631, 1585, 1630 | Hydroxyl (O-H) | 1 |
| polycaprolactone | 631, 1580, 1751 | Amide | 1 |
| apatite | 631, 3053, 1640 | Phosphate (PO4), Phosphorus, Amide | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 631 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Hydroxyl (O-H) độ tin cậy 1,0
“3 cm-1, cm-1 The sharp narrow band at 630.92 634.47 and wide band at 3525.94 cm-1 are associated with the hydroxyl”
XRD and FTIR study of A&B type carbonated hydroxyapatite extracted from bovine bone DOI: 10.1063/1.5089399 -
Silicon (Si) độ tin cậy 1,0
“On the other hand, MMT nanoclays can be identified by stretching of Si-O-Si associated with bands of 631 cm-1 and 1075 cm-1 attributed to the bending of this group.”
Physical-Mechanical Behavior and Water-Barrier Properties of Biopolymers-Clay Nanocomposites DOI: 10.3390/molecules26216734 -
Phosphate (PO4) độ tin cậy 1,0
“There are two strong peaks due to the asymmetric ν4 bending mode of (PO4), a smaller peak at 631 cm-1 due to hycm-1 ν3 characteristic of phosphate groups at 1048 and 1087 attributed to asymmetric droxyl groups, a few weaker peaks due to car”
Archaeometric Investigations of the Chalcolithic Pottery from Topolița—Neamț County, Romania DOI: 10.3390/coatings13030488 -
Amide độ tin cậy 1,0
“Proteins, including the amide I peak at 1,631 cm-1, exhibit the strongest bands in the spectra depending on the secondary structure of the”
Macotpet 等 - 2020 - Attenuated total reflection Fourier transform infr DOI: 10.4142/jvs.2020.21.e16 -
Hydroxyl (O-H) độ tin cậy 1,0
“There is no evidence of any characteristic hydroxyl group vibrations (631 and 3572”
Mirkovic 等 - 2018 - Structural, Morphological and Electrical Propertie DOI: 10.2298/SOS1801095M -
Hydroxyl (O-H) độ tin cậy 1,0
“LLM confirmed rule peak-group candidate”
Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) Biocomposites Prepared via Cold Isostatic Pressing DOI: 10.3390/polym15030559 -
Metal oxygen độ tin cậy 0,95
“Explicit assignment: 'peak at 631cm-1 is attributed to the vibration of the Ti-O of anatase.'”
Sun 等 - 2006 - Preparation and gas-sensing property of a nanosize DOI: 10.1016/j.snb.2005.06.006
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.