What absorbs at 631 cm⁻¹ in an FTIR spectrum?
A band near 631 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Szybka odpowiedź
A band near 631 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Możliwe przypisania grup funkcyjnych
| Grupa funkcyjna | Fakty wspierające | Cytowane źródła | Najwyższa wiarygodność |
|---|---|---|---|
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 0,95 |
Ranking odzwierciedla zgromadzone dowody literaturowe, a nie pojedynczą autorytatywną zasadę. Zawsze potwierdzaj w kontekście swojej próbki.
Możliwe materiały
| Materiał | Piki potwierdzające | Nakładające się grupy | Cytowane źródła |
|---|---|---|---|
| PVA | 631, 1660, 2930 | Hydroxyl (O-H), Amide | 1 |
| starch | 631, 1650, 1540 | Hydroxyl (O-H), Amide | 1 |
| glycerol | 631, 1585, 1630 | Hydroxyl (O-H) | 1 |
| polycaprolactone | 631, 1580, 1751 | Amide | 1 |
| apatite | 631, 3053, 1640 | Phosphate (PO4), Phosphorus, Amide | 1 |
Materiały są wyświetlane tylko wtedy, gdy ta sama baza literaturowa potwierdza to pasmo i co najmniej jeden dodatkowy charakterystyczny pik.
Logika widma
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 631 cm⁻¹ is usually not enough for material identification by itself.
Zastosowanie w rzeczywistości
Ten typ zapytania jest powszechny w identyfikacji polimerów, przesiewaniu nieznanych tworzyw sztucznych, rozwiązywaniu problemów z kontrolą jakości, weryfikacji materiałów pochodzących z recyklingu oraz przeglądzie przypisania pików wspartym literaturą.
Częste błędy
- Traktowanie jednego izolowanego pasma jako dowodu materiału bez sprawdzenia co najmniej jednego lub dwóch pików wspierających.
- Ignorowanie nakładania się: wiele grup funkcyjnych może przyczyniać się w pobliżu tej samej liczby falowej.
- Pomijanie walidacji, gdy dodatki, mieszanki, utlenianie lub zanieczyszczenia mogą zniekształcić widmo.
Porada dotycząca weryfikacji
Gdy pozostaje niejednoznaczność, zweryfikuj hipotezę za pomocą DSC, GC-MS lub TGA, szczególnie w przypadku mieszanin, zdegradowanych próbek i wypełnionych polimerów.
Literatura stojąca za tymi przypisaniami
-
Hydroxyl (O-H) wiarygodność 1,0
“3 cm-1, cm-1 The sharp narrow band at 630.92 634.47 and wide band at 3525.94 cm-1 are associated with the hydroxyl”
XRD and FTIR study of A&B type carbonated hydroxyapatite extracted from bovine bone DOI: 10.1063/1.5089399 -
Silicon (Si) wiarygodność 1,0
“On the other hand, MMT nanoclays can be identified by stretching of Si-O-Si associated with bands of 631 cm-1 and 1075 cm-1 attributed to the bending of this group.”
Physical-Mechanical Behavior and Water-Barrier Properties of Biopolymers-Clay Nanocomposites DOI: 10.3390/molecules26216734 -
Phosphate (PO4) wiarygodność 1,0
“There are two strong peaks due to the asymmetric ν4 bending mode of (PO4), a smaller peak at 631 cm-1 due to hycm-1 ν3 characteristic of phosphate groups at 1048 and 1087 attributed to asymmetric droxyl groups, a few weaker peaks due to car”
Archaeometric Investigations of the Chalcolithic Pottery from Topolița—Neamț County, Romania DOI: 10.3390/coatings13030488 -
Amide wiarygodność 1,0
“Proteins, including the amide I peak at 1,631 cm-1, exhibit the strongest bands in the spectra depending on the secondary structure of the”
Macotpet 等 - 2020 - Attenuated total reflection Fourier transform infr DOI: 10.4142/jvs.2020.21.e16 -
Hydroxyl (O-H) wiarygodność 1,0
“There is no evidence of any characteristic hydroxyl group vibrations (631 and 3572”
Mirkovic 等 - 2018 - Structural, Morphological and Electrical Propertie DOI: 10.2298/SOS1801095M -
Hydroxyl (O-H) wiarygodność 1,0
“LLM confirmed rule peak-group candidate”
Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) Biocomposites Prepared via Cold Isostatic Pressing DOI: 10.3390/polym15030559 -
Metal oxygen wiarygodność 0,95
“Explicit assignment: 'peak at 631cm-1 is attributed to the vibration of the Ti-O of anatase.'”
Sun 等 - 2006 - Preparation and gas-sensing property of a nanosize DOI: 10.1016/j.snb.2005.06.006
Masz widmo z tym pasmem?
Prześlij swoje widmo FTIR i uzyskaj pełny raport interpretacji — przypisania pików z cytowaniami literaturowymi, dopasowania biblioteczne oraz łańcuch dowodów z oceną wiarygodności — w kilka sekund.