What absorbs at 631 cm⁻¹ in an FTIR spectrum?
A band near 631 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Réponse rapide
A band near 631 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Attributions possibles de groupes fonctionnels
| Groupe fonctionnel | Faits à l＇appui | Sources citées | Confiance maximale |
|---|---|---|---|
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 0,95 |
Le classement reflète les preuves bibliographiques accumulées, et non une règle faisant autorité. Confirmez toujours dans le contexte de votre échantillon.
Matériaux possibles
| Matériel | Pics de support | Groupes chevauchants | Sources citées |
|---|---|---|---|
| PVA | 631, 1660, 2930 | Hydroxyl (O-H), Amide | 1 |
| starch | 631, 1650, 1540 | Hydroxyl (O-H), Amide | 1 |
| glycerol | 631, 1585, 1630 | Hydroxyl (O-H) | 1 |
| polycaprolactone | 631, 1580, 1751 | Amide | 1 |
| apatite | 631, 3053, 1640 | Phosphate (PO4), Phosphorus, Amide | 1 |
Les matériaux sont affichés uniquement lorsque le même ensemble de littérature soutient cette bande et au moins un pic caractéristique supplémentaire.
Logique du spectre
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 631 cm⁻¹ is usually not enough for material identification by itself.
Utilisation réelle
Ce type de requête est courant dans l＇identification des polymères, le criblage des plastiques inconnus, le dépannage du contrôle qualité, la vérification des matériaux recyclés et l＇examen de l＇attribution des pics appuyée par la littérature.
Erreurs courantes
- Traiter une bande isolée comme preuve d＇un matériau sans vérifier au moins un ou deux pics de support.
- Ignorer le chevauchement : plusieurs groupes fonctionnels peuvent contribuer près du même nombre d＇onde.
- Sauter la validation lorsque des additifs, des mélanges, l＇oxydation ou la contamination peuvent déformer le spectre.
Conseil de vérification
Lorsque l＇ambiguïté persiste, validez l＇hypothèse avec DSC, GC-MS ou TGA, en particulier pour les mélanges, les échantillons dégradés et les polymères chargés.
Bibliographie derrière ces attributions
-
Hydroxyl (O-H) confiance 1,0
“3 cm-1, cm-1 The sharp narrow band at 630.92 634.47 and wide band at 3525.94 cm-1 are associated with the hydroxyl”
XRD and FTIR study of A&B type carbonated hydroxyapatite extracted from bovine bone DOI: 10.1063/1.5089399 -
Silicon (Si) confiance 1,0
“On the other hand, MMT nanoclays can be identified by stretching of Si-O-Si associated with bands of 631 cm-1 and 1075 cm-1 attributed to the bending of this group.”
Physical-Mechanical Behavior and Water-Barrier Properties of Biopolymers-Clay Nanocomposites DOI: 10.3390/molecules26216734 -
Phosphate (PO4) confiance 1,0
“There are two strong peaks due to the asymmetric ν4 bending mode of (PO4), a smaller peak at 631 cm-1 due to hycm-1 ν3 characteristic of phosphate groups at 1048 and 1087 attributed to asymmetric droxyl groups, a few weaker peaks due to car”
Archaeometric Investigations of the Chalcolithic Pottery from Topolița—Neamț County, Romania DOI: 10.3390/coatings13030488 -
Amide confiance 1,0
“Proteins, including the amide I peak at 1,631 cm-1, exhibit the strongest bands in the spectra depending on the secondary structure of the”
Macotpet 等 - 2020 - Attenuated total reflection Fourier transform infr DOI: 10.4142/jvs.2020.21.e16 -
Hydroxyl (O-H) confiance 1,0
“There is no evidence of any characteristic hydroxyl group vibrations (631 and 3572”
Mirkovic 等 - 2018 - Structural, Morphological and Electrical Propertie DOI: 10.2298/SOS1801095M -
Hydroxyl (O-H) confiance 1,0
“LLM confirmed rule peak-group candidate”
Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) Biocomposites Prepared via Cold Isostatic Pressing DOI: 10.3390/polym15030559 -
Metal oxygen confiance 0,95
“Explicit assignment: 'peak at 631cm-1 is attributed to the vibration of the Ti-O of anatase.'”
Sun 等 - 2006 - Preparation and gas-sensing property of a nanosize DOI: 10.1016/j.snb.2005.06.006
Avez-vous un spectre avec cette bande ?
Téléchargez votre spectre FTIR et obtenez un rapport d＇interprétation complet — attributions de pics avec citations bibliographiques, correspondances de bibliothèque et une chaîne de preuves avec évaluation de la confiance — en quelques secondes.