What absorbs at 518 cm⁻¹ in an FTIR spectrum?
A band near 518 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
คำตอบด่วน
A band near 518 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
การกำหนดหมู่ฟังก์ชันที่เป็นไปได้
| หมู่ฟังก์ชัน | ข้อเท็จจริงสนับสนุน | แหล่งอ้างอิง | ความเชื่อมั่นสูงสุด |
|---|---|---|---|
| Silicon (Si) | 3 | 3 | 1.0 |
| Metal oxygen | 2 | 2 | 1.0 |
| Silicon silicon | 1 | 1 | 1.0 |
| Phosphorus | 1 | 0 | 1.0 |
| Phosphate (PO4) | 1 | 0 | 1.0 |
การจัดอันดับสะท้อนถึงหลักฐานจากเอกสารที่สะสม ไม่ใช่กฎที่เชื่อถือได้เพียงข้อเดียว ควรยืนยันกับบริบทตัวอย่างของคุณเสมอ
วัสดุที่เป็นไปได้
| วัสดุ | พีคที่สนับสนุน | กลุ่มที่ซ้อนทับ | แหล่งอ้างอิง |
|---|---|---|---|
| silica | 518, 1100, 1080 | Silicon (Si) | 2 |
| montmorillonite | 518, 1637, 523 | Silicon (Si) | 1 |
วัสดุจะแสดงเฉพาะเมื่อชุดข้อมูลวรรณกรรมเดียวกันสนับสนุนแถบนี้และพีคลักษณะเฉพาะเพิ่มเติมอย่างน้อยหนึ่งพีค
ตรรกะสเปกตรัม
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 518 cm⁻¹ is usually not enough for material identification by itself.
การใช้งานจริง
การสอบถามประเภทนี้พบได้ทั่วไปในการระบุพอลิเมอร์, การคัดกรองพลาสติกที่ไม่รู้จัก, การแก้ไขปัญหา QC, การตรวจสอบวัสดุรีไซเคิล และการทบทวนการกำหนดพีคที่ได้รับการสนับสนุนจากเอกสาร
ข้อผิดพลาดทั่วไป
- การถือว่าแถบที่แยกออกมาเพียงหนึ่งแถบเป็นหลักฐานของวัสดุโดยไม่ตรวจสอบจุดสูงสุดสนับสนุนอย่างน้อยหนึ่งหรือสองจุด
- ละเว้นการซ้อนทับ: หมู่ฟังก์ชันหลายหมู่สามารถมีส่วนร่วมใกล้ค่า wavenumber เดียวกัน
- การข้ามการตรวจสอบเมื่อสารเติมแต่ง, การผสม, การออกซิเดชันหรือการปนเปื้อนอาจทำให้สเปกตรัมผิดเพี้ยน
คำแนะนำการยืนยัน
เมื่อยังมีความคลุมเครือ ให้ตรวจสอบสมมติฐานด้วย DSC, GC-MS หรือ TGA โดยเฉพาะสำหรับของผสม ตัวอย่างที่เสื่อมสภาพ และพอลิเมอร์ที่มีสารตัวเติม
เอกสารอ้างอิงเบื้องหลังการกำหนดเหล่านี้
-
Silicon (Si) ความเชื่อมั่น 1.0
“The pronounced peak around cm-1 518 was observed from the Raman spectrum, characteristic of crystalline silicon.”
Nanostructured Silicon Derived from an Agricultural Residue Bagasse Ash via Magnesiothermic Reduction Method DOI: 10.3390/coatings13020221 -
Silicon (Si) ความเชื่อมั่น 1.0
“tions of SiO4 tetrahedra at 668 and 603 cm-1 (νsSi-O-Si), and 518 and 473 cm-1, due to Sicm-1 cm-1, (ν tions of SiO tetrahedra at 668 and 603 sSi-O-Si), and 518 and 473 due to 4 O-Si and O-Si-O bending vibrations, respectively.”
Phase Composition of Silica Fume—Portland Cement Systems Formed under Hydrothermal Curing Evaluated by FTIR, XRD, and TGA DOI: 10.3390/ma14112786 -
ความเชื่อมั่น 1.0
“In addition, the absorption and 518 cm-1 and 471 cm-1 for Cn-MT2 are attributed to Mg-O-Si and Mg-O bending vibration,”
Qiu 等 - 2020 - Comprehensive Characterization of the Structure an DOI: 10.3390/min10040378 -
Metal oxygen ความเชื่อมั่น 0.9
“Peak at 518 related to Fe-O, Al-O, Fe-Al-O”
Heteropolyacid coupled with cyanoguanidine decorated magnetic chitosan as an efficient catalyst for the synthesis of pyranochromene derivatives DOI: 10.1038/s41598-022-21196-2
มีสเปกตรัมที่มีแถบนี้หรือไม่?
อัปโหลดสเปกตรัม FTIR ของคุณและรับรายงานการแปลความหมายฉบับสมบูรณ์ — การกำหนดพีคพร้อมการอ้างอิงเอกสาร การจับคู่ห้องสมุด และห่วงโซ่หลักฐานที่มีการให้คะแนนความเชื่อมั่น — ภายในไม่กี่วินาที