What absorbs at 518 cm⁻¹ in an FTIR spectrum?
A band near 518 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Pikavastaus
A band near 518 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mahdolliset funktionaalisten ryhmien määritykset
| Funktionaalinen ryhmä | Tukevat tosiasiat | Viitatut lähteet | Korkein luottamus |
|---|---|---|---|
| Silicon (Si) | 3 | 3 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Silicon silicon | 1 | 1 | 1,0 |
| Phosphorus | 1 | 0 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
Sijoitus kuvastaa kertyneitä kirjallisuustodisteita, ei yhtä auktoritatiivista sääntöä. Varmista aina suhteessa näytteesi asiayhteyteen.
Mahdolliset materiaalit
| Materiaali | Tukevat huiput | Päällekkäiset ryhmät | Viitatut lähteet |
|---|---|---|---|
| silica | 518, 1100, 1080 | Silicon (Si) | 2 |
| montmorillonite | 518, 1637, 523 | Silicon (Si) | 1 |
Materiaalit näytetään vain, kun sama kirjallisuuspooli tukee tätä kaistaa ja vähintään yhtä lisäominaisuuspiikkiä.
Spektrilogiikka
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 518 cm⁻¹ is usually not enough for material identification by itself.
Todellinen käyttö
Tällainen kysely on yleinen polymeerien tunnistuksessa, tuntemattomien muovien seulonnassa, laadunvalvonnan vianmäärityksessä, kierrätysmateriaalien varmennuksessa ja kirjallisuuteen perustuvassa piikkien määrityksen tarkastelussa.
Yleiset virheet
- Yksittäisen eristetyn piikin käsittely materiaalin todisteena tarkistamatta ainakin yhtä tai kahta tukevia piikkejä.
- Ohitetaan päällekkäisyys: useat funktionaaliset ryhmät voivat vaikuttaa lähellä samaa aaltolukua.
- Vahvistuksen ohittaminen, kun lisäaineet, seokset, hapettuminen tai kontaminaatio voivat vääristää spektriä.
Varmistusneuvo
Kun epäselvyyttä on jäljellä, vahvista hypoteesi DSC:llä, GC-MS:llä tai TGA:lla, erityisesti seoksille, hajonneille näytteille ja täytetyille polymeereille.
Näiden määritysten taustalla oleva kirjallisuus
-
Silicon (Si) luottamus 1,0
“The pronounced peak around cm-1 518 was observed from the Raman spectrum, characteristic of crystalline silicon.”
Nanostructured Silicon Derived from an Agricultural Residue Bagasse Ash via Magnesiothermic Reduction Method DOI: 10.3390/coatings13020221 -
Silicon (Si) luottamus 1,0
“tions of SiO4 tetrahedra at 668 and 603 cm-1 (νsSi-O-Si), and 518 and 473 cm-1, due to Sicm-1 cm-1, (ν tions of SiO tetrahedra at 668 and 603 sSi-O-Si), and 518 and 473 due to 4 O-Si and O-Si-O bending vibrations, respectively.”
Phase Composition of Silica Fume—Portland Cement Systems Formed under Hydrothermal Curing Evaluated by FTIR, XRD, and TGA DOI: 10.3390/ma14112786 -
luottamus 1,0
“In addition, the absorption and 518 cm-1 and 471 cm-1 for Cn-MT2 are attributed to Mg-O-Si and Mg-O bending vibration,”
Qiu 等 - 2020 - Comprehensive Characterization of the Structure an DOI: 10.3390/min10040378 -
Metal oxygen luottamus 0,9
“Peak at 518 related to Fe-O, Al-O, Fe-Al-O”
Heteropolyacid coupled with cyanoguanidine decorated magnetic chitosan as an efficient catalyst for the synthesis of pyranochromene derivatives DOI: 10.1038/s41598-022-21196-2
Onko sinulla spektri tällä vyöhykkeellä?
Lataa FTIR-spektrisi ja saat täydellisen tulkintaraportin — huippumääritykset kirjallisuusviitteineen, kirjastosumitukset ja luottamusluokitellun todisteketjun — sekunneissa.