What absorbs at 518 cm⁻¹ in an FTIR spectrum?
A band near 518 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
إجابة سريعة
A band near 518 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
تعيينات المجموعات الوظيفية المحتملة
| مجموعة وظيفية | حقائق داعمة | المصادر المستشهد بها | أعلى ثقة |
|---|---|---|---|
| Silicon (Si) | 3 | 3 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Silicon silicon | 1 | 1 | 1,0 |
| Phosphorus | 1 | 0 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
يعكس الترتيب الأدلة الأدبية المتراكمة، وليس قاعدة واحدة موثوقة. تأكد دائمًا من سياق عينتك.
المواد المحتملة
| مادة | القمم الداعمة | المجموعات المتداخلة | المصادر المستشهد بها |
|---|---|---|---|
| silica | 518, 1100, 1080 | Silicon (Si) | 2 |
| montmorillonite | 518, 1637, 523 | Silicon (Si) | 1 |
تظهر المواد فقط عندما يدعم نفس مجموعة الأدبيات هذا النطاق وذروة مميزة إضافية واحدة على الأقل.
منطق الطيف
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 518 cm⁻¹ is usually not enough for material identification by itself.
الاستخدام في العالم الحقيقي
هذا النوع من الاستعلام شائع في تحديد البوليمر، وفحص البلاستيك غير المعروف، واستكشاف أخطاء مراقبة الجودة، والتحقق من المواد المعاد تدويرها، ومراجعة تعيين القمم المدعومة بالأدبيات.
الأخطاء الشائعة
- معالجة نطاق معزول واحد كدليل على المادة دون التحقق من ذروة داعمة واحدة أو اثنتين على الأقل.
- تجاهل التداخل: يمكن أن تساهم مجموعات وظيفية متعددة بالقرب من نفس رقم الموجة.
- تخطي التحقق من الصحة عندما قد تؤدي الإضافات أو الخلائط أو الأكسدة أو التلوث إلى تشويه الطيف.
نصيحة التحقق
عندما يبقى الغموض، تحقق من الفرضية باستخدام DSC أو GC-MS أو TGA، خاصة للمخاليط والعينات المتحللة والبوليمرات المملوءة.
الأدبيات وراء هذه التعيينات
-
Silicon (Si) الثقة 1,0
“The pronounced peak around cm-1 518 was observed from the Raman spectrum, characteristic of crystalline silicon.”
Nanostructured Silicon Derived from an Agricultural Residue Bagasse Ash via Magnesiothermic Reduction Method DOI: 10.3390/coatings13020221 -
Silicon (Si) الثقة 1,0
“tions of SiO4 tetrahedra at 668 and 603 cm-1 (νsSi-O-Si), and 518 and 473 cm-1, due to Sicm-1 cm-1, (ν tions of SiO tetrahedra at 668 and 603 sSi-O-Si), and 518 and 473 due to 4 O-Si and O-Si-O bending vibrations, respectively.”
Phase Composition of Silica Fume—Portland Cement Systems Formed under Hydrothermal Curing Evaluated by FTIR, XRD, and TGA DOI: 10.3390/ma14112786 -
الثقة 1,0
“In addition, the absorption and 518 cm-1 and 471 cm-1 for Cn-MT2 are attributed to Mg-O-Si and Mg-O bending vibration,”
Qiu 等 - 2020 - Comprehensive Characterization of the Structure an DOI: 10.3390/min10040378 -
Metal oxygen الثقة 0,9
“Peak at 518 related to Fe-O, Al-O, Fe-Al-O”
Heteropolyacid coupled with cyanoguanidine decorated magnetic chitosan as an efficient catalyst for the synthesis of pyranochromene derivatives DOI: 10.1038/s41598-022-21196-2
هل لديك طيف بهذه الحزمة؟
قم بتحميل طيف FTIR الخاص بك واحصل على تقرير تفسير كامل — تعيينات الذروة مع استشهادات الأدبيات، مطابقات المكتبة، وسلسلة أدلة مصنفة الثقة — في ثوانٍ.