What absorbs at 433 cm⁻¹ in an FTIR spectrum?
A band near 433 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Câu trả lời nhanh
A band near 433 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Metal oxygen | 3 | 3 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| SiO2 | 433, 1739, 699 | Hydroxyl (O-H), Metal oxygen | 1 |
| hydroxyapatite | 433, 1620, 1639 | Phosphate (PO4), Hydroxyl (O-H) | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 433 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Phosphate (PO4) độ tin cậy 1,0
“592cm(cid:1)1 showed the same peaks at 433 and due to internal O492 1.7m2/g) perature was greater at 0% (from 5.7 to and 5% SAID 430 963cm(cid:1)1 43(cid:1) PAO P-O vibration, at due to of the PO and at 1040 493 1.6m2/g) 1.4m2/g) (from 4.7”
Structure reinforcement of porous hydroxyapatite pellets using sodium carbonate as sintering aid: Microstructure, secondary phases and mechanical properties DOI: 10.1016/j.apt.2019.05.013 -
Metal oxygen độ tin cậy 1,0
“4]2(cid:2) 711-933cm(cid:2)1, tetrahedrons was detected at and The strong W-O stretching in [WO 433cm(cid:2)1.”
Phuruangrat 等 - 2010 - Synthesis, characterisation and photoluminescence DOI: 10.1080/17458080903513276 -
độ tin cậy 1,0
“From Fourier Transform Infrared cm-1 Spectroscopy (FTIR), the band at 433 is attributed to Zn-O bond Key words: Nanoparticles, Optical properties, XRD”
Pandiyarajan 和 Karthikeyan - 2011 - Optical, phonon and structural analysis of Na dope DOI: 10.1117/12.890082 -
Metal oxygen độ tin cậy 1,0
“From the FTIR spectrum, a strong peak of 862 has been obtained due to the 42cm-1 stretching vibration of WO in scheelite structure, and a weak but sharp band at 433 has been noticed due to the metal-oxygen (Ca-O) band.”
Abozaid 等 - 2018 - Characterization of Neodymium Doped Calcium Tungst DOI: 10.2298/SOS1804445A -
Phosphate (PO4) độ tin cậy 1,0
“The peaks at 433 cm-1 and 447 cm-1 were assigned to PO43υ2 vibration (bending mode), and the peaks at 1030 cm-1, 1047 cm-1 and 1079 cm-1 (arb.”
Gavinho 等 - 2023 - An Eco-Friendly Process to Extract Hydroxyapatite DOI: 10.3390/jfb14050279 -
Hydroxyl (O-H) độ tin cậy 1,0
“The first 3,630 The stretching and bending vibrations of the one (up to 433 K) is attributed to the dehydration of the hydroxyl groups of water molecules present in the clay can cm-1,”
Natkanski 等 - 2013 - Effect of Fe3+ ions present in the structure of po DOI: 10.1007/s10973-013-3225-x -
độ tin cậy 0,9
“Text: '433 are attributed to ... N bending vibrations'”
Francis 等 - 2016 - Optical nonlinearity in multiferroic bismuth ferri DOI: 10.1016/j.jallcom.2016.07.094 -
độ tin cậy 0,7
“Lewis Al2Cl peaks assigned”
Understanding the molecular structure of the elastic and thermoreversible AlCl3:urea/polyethylene oxide gel electrolyte DOI: 10.1002/cssc.202001557
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.