What absorbs at 428 cm⁻¹ in an FTIR spectrum?
A band near 428 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Câu trả lời nhanh
A band near 428 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Metal oxygen | 4 | 4 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 0,7 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| TiO2 | 428, 1700, 1093 | Metal oxygen | 1 |
| nanoparticles | 428, 1732, 1647 | Metal oxygen | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 428 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Metal oxygen độ tin cậy 1,0
“The peaks located at 493, 443 and cm-1 428 is likely due to the vibration of the TiO 2, which confirms the prepared sample is TiO nanostructures.”
Synthesis and Characterization of Spindle-Like TiO2 Nanostructures and Photocatalytic Activity on Methyl Orange and Methyl Blue Dyes Under Sunlight Radiation DOI: 10.1007/s10876-017-1245-6 -
độ tin cậy 1,0
“The peaks at 1124 and 428 cm-1 are the typical absorption peaks of the Zn-O bond,”
Kumar 等 - 2021 - Centella asiatica mediated facile green synthesis DOI: 10.1016/j.inoche.2021.108865 -
Water (H2O) độ tin cậy 1,0
“hydroxyl group and water Silicaandsilicates;aluminumoxyhydroxide 7 1099 Si-Ostretch;OHvibration andironoxyhydroxides 4 1681 Stretching Water molecules SO428 665”
The Physico-Chemical and Mineralogical Characterization of Mg-Rich Synthetic Gypsum Produced in a Rare Earth Refining Plant DOI: 10.3390/su13094840 -
độ tin cậy 1,0
“After calcinalamp (HWL 500 W 225 V E40) was purchased from the OSRAM tion, all the characteristic peaks of the ligand disappeared and Company in China and the short wavelength components of the only a peak at 428 cm-1, which is attributed t”
Bijanzad 等 - 2015 - Photocatalytic activity of mesoporous microbricks DOI: 10.1016/S1872-2067(14)60305-3 -
độ tin cậy 1,0
“the sharpness of these bands fairly cm-1, cm-1 428 can be attributed to Fe-O symmetric stretching indicate lack of defects and crystal purity.”
Kiss 等 - 2015 - Elucidating Some Issues Regarding the Synthesis of DOI: 10.1063/1.4937250 -
độ tin cậy 1,0
“In cm-1 450S and 650S, the twin peaks near 428 and 444 [74, cm-1 Si-O Si-O-Si 75] are from bending;”
Biochar from co-pyrolysis of urban organic wastes—investigation of carbon sink potential using ATR-FTIR and TGA DOI: 10.1007/s13399-020-01000-9 -
Chlorine độ tin cậy 1,0
“423.8 16.4 the control, only a slight increase in the degradation peak temperature 428.2 and a decrease of the enthalpy due to the lower crystallinity of the CO+pH +CL 309.3;”
Yavuz 等 - 2018 - Structural coloration of chitosan coated cellulose DOI: 10.1016/j.carbpol.2018.03.084 -
Phosphate (PO4) độ tin cậy 0,7
“PO ν in region 428-455”
Seredin 等 - 2020 - Development of a new approach to diagnosis of the DOI: 10.1038/s41598-020-78078-8
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.