What absorbs at 415 cm⁻¹ in an FTIR spectrum?
A band near 415 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Schnelle Antwort
A band near 415 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| N h | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 0,8 |
| Borate | 1 | 1 | 0,8 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO NPs | 415, 1664, 875 | Alkyl C-H, Metal oxygen, N h | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 415 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“Absorption at 415 stretching frequency of Zn-O bonds confirms the presence of M-O vibrational band.”
Vindhya 等 - 2019 - Dielectric properties of Zinc Oxide Nanoparticles DOI: 10.1063/1.5093888 -
Alkyl C-H Vertrauen 1,0
“CH and CH stretching, 3 2 cm-1 415 (Rohman & Che Man, 2012).”
Lefroy 等 - 2021 - A natural, cellulose-based microgel for water-in-o DOI: 10.1016/j.foodhyd.2020.106408 -
Vertrauen 1,0
“Also, 414 cm-1 the wide absorption band at 3600-3100 was attributed to O-H and N-H vibration stretching 415 [34-5].”
Rasul 等 - 2022 - Development of antimicrobialantioxidant nanocompo DOI: 10.21203/rs.3.rs-337479/v1 -
Borate Vertrauen 0,8
“Characteristic peaks for B-O, P-O, B-H vibration modes.”
Dalui 等 - 2008 - Boron phosphide films prepared by co-evaporation t DOI: 10.1016/j.tsf.2007.09.047
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.