What absorbs at 407 cm⁻¹ in an FTIR spectrum?
A band near 407 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Câu trả lời nhanh
A band near 407 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Metal oxygen | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Nitrate | 1 | 0 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| ZnO | 407, 1400, 3430 | Metal oxygen, C-O single bond | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 407 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
độ tin cậy 1,0
“Utilising this calibration curve, from the 3reaction mixture IR spectrums, the product mixture composition detect any meaningful nitrogen peaks for NO around 407 eV (or even”
A new approach to silver-catalysed aerobic oxidation of octadecanol: Probing catalysts utilising a flat, two-dimensional silicon-based model support system DOI: 10.1016/j.catcom.2012.07.013 -
C-O single bond độ tin cậy 1,0
“Furthermore, the O-C-C scissoring (407 cm-1) of CS 2, EtOH, CO, CO 2, COS, H 2O, SO 2, EtSH, Et 2S, 436 of the ethyl group has disappeared, in correlation Et 2O, and (EX) in a proportionally smaller quantity, with EGA-MS results, where evol”
Thermal decomposition of tris(O-ethyldithiocarbonato)-antimony(III)—a single-source precursor for antimony sulfide thin films DOI: 10.1007/s10973-021-10885-1 -
N-O bond độ tin cậy 1,0
“Thus, TiC and TiO have no band gap at E F 407.”
Fernandes 等 - 2006 - Property change in multifunctional TiCxOy thin fil DOI: 10.1016/j.tsf.2006.07.047 -
độ tin cậy 1,0
“cm-1, 407 These bands are assigned to the Zn-O stretching vibrations [10].”
Ivanova 等 - 2020 - Deposition and study of N-In co-doped sol-gel ZnO DOI: 10.1088/1742-6596/1492/1/012027
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.