What absorbs at 3633 cm⁻¹ in an FTIR spectrum?
A band near 3633 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Schnelle Antwort
A band near 3633 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Metal hydroxyl | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3633 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“The double peaks at 3680 cm-1 and 3633 cm-1 were observed due to the stretching vibration of the hydroxyl group at the surface of HNTs.”
Synthesis and Optimization of Superhydrophilic-Superoleophobic Chitosan–Silica/HNT Nanocomposite Coating for Oil–Water Separation Using Response Surface Methodology DOI: 10.3390/nano12203673 -
Hydroxyl (O-H) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Growth, structure, Hirshfeld surface and spectroscopic properties of 2-amino-4-hydroxy-6-methylpyrimidinium-2,3-pyrazinedicorboxylate single crystal DOI: 10.1016/j.molstruc.2017.11.019 -
Hydroxyl (O-H) Vertrauen 1,0
“Most of the SM samcm-1, which are due obvious peaks at 3633, 3525 and 3323 ples are in the form of amorphous carbon, while semi-coke to -OH stretching vibration in alcohols and stretching vibrashows a tendency to graphitize.”
Huang 等 - 2021 - Experimental research on semi-coke for blast furna DOI: 10.1007/s42243-020-00480-3 -
Vertrauen 1,0
“In the control CTAC-MMT, the absorption peak observed at 3633 was attributed to the stretching vibration of Al-Al-OH groups in the octahedral layer.”
Mushtaq 等 - 2020 - Composite of PLA Nanofiber and Hexadecyl Trimethyl DOI: 10.3390/coatings10050484
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.