What absorbs at 3047 cm⁻¹ in an FTIR spectrum?
A band near 3047 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Câu trả lời nhanh
A band near 3047 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Alkyl C-H | 3 | 3 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| biomass | 3047, 1082, 1282 | Alkyl C-H, Aromatic ring, Amide | 1 |
| coal | 3047, 1600, 3030 | Alkyl C-H, Aromatic ring | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3047 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Alkyl C-H độ tin cậy 1,0
“The spectrum for 1-MN, shown in Figure 2b, exhibited the aromatic cm-1, cm-1, C-H stretching band at 3047 the aliphatic C-H stretching band at 2980-2870 as well as cm-1.”
Ketren 等 - 2019 - Investigation on Conversion Pathways in Degradativ DOI: 10.3390/en12030528 -
Alkyl C-H độ tin cậy 1,0
“FTIR spectra of control perylene (Fig.7a) showed the -1 charactereristic absorption peaks at 3047 cm (=CH stretch in -1 aromatic rings), 2850.79-2953.02 cm (C-H stretching in cyclic -1 Fig.”
Mandal 和 Das - 2018 - Biodegradation of perylene and benzo [ghi] perylen DOI: 10.22438/jeb/39/1/MRN-540 -
Alkene (C=C) độ tin cậy 1,0
“1,6-Bis[4-(naphthyliminomethylidene)-phenoxy]-hexane cm-1): ν, FTIR (KBr, 3047 (=C-H stretch of the aromatic rings), 2941-2856 (C-H stretch of aliphatic chains), 1618 (-N=CHstretch), 1605, 1565, 1513 (C-C ring stretch), 1246, 1H-NMR 1166 (C”
Mesomorphic Behavior of Symmetric Azomethine Dimers Containing Different Chromophore Groups DOI: 10.3390/molecules26082183 -
độ tin cậy 1,0
“The typically broad band centered at 3159 such as acetic, citric and butyric acids) (Shumilina et al., 2020), the mainly correN\\H C_O cm-1 signal at 1666 sponds to the stretch in peptides and amino acids (the shoulder can correspond to the”
Comprehensive characterization of industrial wastewaters using EEM fluorescence, FT-IR and 1H NMR techniques DOI: 10.1016/j.scitotenv.2021.150417
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.