What absorbs at 2989 cm⁻¹ in an FTIR spectrum?
A band near 2989 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Câu trả lời nhanh
A band near 2989 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Secondary amine | 1 | 0 | 1,0 |
| N h | 1 | 0 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| polypropylene | 2989, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| PLA | 2989, 1650, 1073 | Alkyl C-H, Hydroxyl (O-H) | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2989 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Alkyl C-H độ tin cậy 1,0
“peak at 2714 New peaks attributable to a dimethylacetal, C-H) HC(OCH 3) 2, appeared at 2832 (acetal carbon and 2989 cm-1 for the methyl groups.”
Razgon 等 - 2008 - Ozonolysis-based route to the in situ formation of DOI: 10.1021/la703120c -
Alkyl C-H độ tin cậy 1,0
“cm-1 In case of AMPS, peak at 2989 is attributed to C-H stretching of-CH2 group.”
Development, characterization and In-vitro evaluation of guar gum based new polymeric matrices for controlled delivery using metformin HCl as model drug DOI: 10.1371/journal.pone.0271623 -
Hydroxyl (O-H) độ tin cậy 1,0
“The broad negative associated regions between 3259 Regression coefficients of xylose and glucose prediction cm-1 (r and 2989 correspond to the O-H stretching vibraThe high correlation = 0.82) of the measured glucose tion of various compound”
Rapid estimation of sugar release from winter wheat straw during bioethanol production using FTIR-photoacoustic spectroscopy DOI: 10.1186/s13068-015-0267-2 -
Alkyl C-H độ tin cậy 1,0
“LLM confirmed rule peak-group candidate”
Silva 等 - 2020 - Theoretical and Experimental Investigations on Inc DOI: 10.21577/0103-5053.20190273 -
Imide độ tin cậy 1,0
“The bismaleThe absorptions around 2989 and 2912 due to the m-cresol imide (1 g, 0.002321 mol) was dissolved in (3.5 mL) C-H stretching vibration of CH group as shown in Fig.”
Sivasankari 等 - 2013 - Synthesis and Characterization of Thiophene Contai DOI: 10.14233/ajchem.2013.13514 -
Alkyl C-H độ tin cậy 0,9
“Explicit assignment from text.”
Partial Biodegradable Blend with High Stability against Biodegradation for Fused Deposition Modeling DOI: 10.3390/polym14081541 -
Hydroxyl (O-H) độ tin cậy 0,9
“C-H vibration of OH group”
Poly lactic acid production using the ring opening polymerization (ROP) method using Lewis acid surfactant combined iron (Fe) catalyst (Fe(DS)3) DOI: 10.1016/j.heliyon.2023.e17985
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.