What absorbs at 2155 cm⁻¹ in an FTIR spectrum?
A band near 2155 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Câu trả lời nhanh
A band near 2155 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Hydroxyl (O-H) | 3 | 2 | 1,0 |
| Adsorbed carbon monoxide | 2 | 0 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 0 | 1,0 |
| Silicon (Si) | 1 | 0 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| CeO2 | 2155, 1554, 1630 | Hydroxyl (O-H) | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2155 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Hydroxyl (O-H) độ tin cậy 1,0
“Physisorbed CO results in a band at 2140 cm-1, whereas CO interacting with surface OH groups gives rise to a band at 2155 while cm-1 cm-1 another massif from 2180 to 2245 accounts for CO interacting with Lewis cm-1”
Upgrading the PtCu intermetallic compounds: The role of Pt and Cu in the alloy DOI: 10.1016/j.cattod.2019.11.026 -
Silanol (Si-OH) độ tin cậy 1,0
“Spectra relative to 80P, 80H correspond to H-bonded cm-1, and 30H samples show a signal, centred at 2155 ascribed to the stretching mode of CO interacting with silanols.”
Erigoni 等 - 2016 - Creating Accessible Active Sites in Hierarchical M DOI: 10.1038/ncomms9633. -
Hydroxyl (O-H) độ tin cậy 1,0
“on Downloaded B10 cm(cid:2)1 cm(cid:2)1 with the surface OH groups, whereas the band at 2155 in comparison with those from the non-chlorinated Published sample.”
Farra 等 - 2013 - Understanding CeO2 as a Deacon catalyst by probe m DOI: 10.1039/C2CP42767B -
độ tin cậy 0,7
“Context: 'CO stretching region, at low coverages a signal centred at ... cm-1, 2155 arose' and 'C=O bond of the urea group'”
Erigoni 等 - 2019 - Acid properties of organosiliceous hybrid material DOI: 10.1039/C9CY01609K.
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.