Metal oxygen — FTIR absorption peaks and assignments
These are the characteristic FTIR wavenumbers where Metal oxygen tends to absorb, compiled from published literature and ranked by supporting evidence. Each assignment is traceable to a source (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Characteristic FTIR peaks for Metal oxygen
| Vlnové číslo (cm⁻¹) | Podpůrná fakta | Citované zdroje | Nejvyšší spolehlivost |
|---|---|---|---|
| 500 | 10 | 10 | 0,9 |
| 450 | 9 | 9 | 1,0 |
| 700 | 8 | 8 | 1,0 |
| 650 | 7 | 7 | 0,9 |
| 550 | 6 | 5 | 1,0 |
| 570 | 6 | 4 | 1,0 |
| 584 | 5 | 5 | 0,9 |
| 530 | 5 | 5 | 0,9 |
| 460 | 5 | 5 | 0,9 |
| 580 | 5 | 5 | 0,9 |
| 600 | 5 | 2 | 1,0 |
| 453 | 4 | 4 | 1,0 |
| 605 | 4 | 4 | 0,9 |
| 555 | 4 | 4 | 0,9 |
| 640 | 4 | 4 | 0,9 |
| 560 | 4 | 4 | 0,9 |
| 475 | 4 | 4 | 0,9 |
| 588 | 4 | 4 | 0,9 |
| 1000 | 4 | 4 | 0,9 |
| 432 | 4 | 4 | 0,9 |
| 461 | 3 | 3 | 1,0 |
| 455 | 3 | 3 | 1,0 |
| 598 | 3 | 3 | 0,95 |
| 634 | 3 | 3 | 0,95 |
| 444 | 3 | 3 | 0,9 |
| 423 | 3 | 3 | 0,9 |
| 412 | 3 | 3 | 0,9 |
| 544 | 3 | 3 | 0,9 |
| 515 | 3 | 3 | 0,9 |
| 590 | 3 | 3 | 0,9 |
Showing the 30 best-supported peaks of 292 total for Metal oxygen.
Literatura za těmito přiřazeními
-
493 cm⁻¹ spolehlivost 1,0
“The peaks located at 493, 443 and cm-1 428 is likely due to the vibration of the TiO 2, which confirms the prepared sample is TiO nanostructures.”
Arunkumar 和 Alagiri - 2017 - Synthesis and Characterization of Spindle-Like TiO DOI: 10.1007/s10876-017-1245-6 -
450 cm⁻¹ spolehlivost 1,0
“The cm-1 567cm-1 absorption bands ~ 449.86 and ~ are associated with the stretching vibration of cm-1 Fe-O and FeO octahedral rotation.”
Asif 等 - 2021 - Evolution of structure and improvement in dielectr DOI: 10.1016/j.ceramint.2020.11.005 -
587 cm⁻¹ spolehlivost 1,0
“Explicit assignment: 'characteristic peak at 587 typical for Fe-O bond'”
Dhar 等 - 2021 - Green synthesis of magnetite nanoparticles using L DOI: 10.1016/j.clet.2021.100117 -
860 cm⁻¹ spolehlivost 1,0
“Band ascribed to Ti-O-Ti chains formation”
Islam - 2021 - Fast responsive anatase nanoparticles coated fiber DOI: 10.1016/j.jallcom.2020.156246 -
562 cm⁻¹ spolehlivost 1,0
“Explicit assignment: 'stretching vibration of Ti-O and Zr-O bonds'”
Jaimeewong 等 - 2016 - Influence of pH values on the surface and properti DOI: 10.1016/j.surfcoat.2016.03.091 -
440 cm⁻¹ spolehlivost 1,0
“assigned to apical oxygen vibrations”
Khan 等 - 2004 - Effects of post-annealing on the infrared active p DOI: 10.1016/j.physc.2004.04.029 -
430 cm⁻¹ spolehlivost 1,0
“Due to the bridging bond.”
Raj 等 - 2015 - Nanostructured V2O5 thin films deposited at low sp DOI: 10.1016/j.mssp.2015.04.054 -
461 cm⁻¹ spolehlivost 1,0
“Explicit assignment: 'vibrations at 461 and 550 which can be assigned for Mg-F and Mg-O'.”
Rosyadi 和 Murwani - 2017 - Synthesis and Characterization of Cu Doped Magnesi DOI: 10.1063/1.4978097
See Metal oxygen in your own spectrum
Nahrajte své FTIR spektrum a získejte plnou interpretační zprávu – přiřazení píků s citacemi literatury, shody s knihovnou a řetězec důkazů s hodnocením spolehlivosti – během několika sekund.
Interpretovat mé spektrum